Step 1.On Home windows 10 open the Run window and kind hdwwiz and click on OK. The hdwwiz command is a brief method so as to add and Adapter
Step 2. After the {hardware} wizard opens, click on Subsequent to Proceed.
Step 3. Proceed by choosing Superior as we’ll add the Loopback card manually.
Step4. Within the {Hardware} Sorts window, choose Community Adapters and click on the Subsequent button.
Step 5. Choose Microsoft from the producer part, after which choose Microsoft KM-TEST Adapter from the correct pane.
Step 6. The next window supplies a abstract of the {hardware} to be put in. On this window, click on Subsequent to proceed.
Step7. Including {hardware} is full and click on End to shut the window.
Step 8. You may see that the loopback card has added efficiently. You may rename the loopback card to keep away from complicated it with different community playing cards.
Step 9.Double-clck on GNS3LOOPback.
Step 10. It’s essential to set and IP tackle for the GNS3Loopback community card. You may change the IP tackle settings right here. After configuring the IP tackle settings. Click on OK to save lots of the settings.
Step 11. You may examine the configuration by clicking the small print button on the community card.
Step12. After restoring your laptop, run the GNS3 program and create a brand new undertaking.
Step 13. Drag and drop one Router and Cloud into the GNS3 workspace. Click on Proper-Click on / Configure to arrange Cloud1.
Step 14. IN the Cloud1 configuration window, you want to choose the loopback community card you added within the Ethernet interfaces part. Upon getting chosen the GNS3Loopback adapter, click on the Add button.
Step 15. After efficiently finishing the loopback community card insertion steps, click on OK to save lots of the settings.
Step 16. To cable cloud1 and Cisco Router, Chick cabling then click on Could1. The Loopback community card will develop into selectable as you possibly can see within the picture beneath.
Step 17. Assign an IP tackle to the Cisco Router FastEthernet 0/0 interface and switch it on Then, take a look at the connection by pinging the loopback IP tackle.
Cloud1 and Cisco router can talk with one another.