I’ve the next standing on my Nexus switches relating to the vPC configuration standing and I see the variety of vPCs configured as zero.
Legend:
(*) - native vPC is down, forwarding through vPC peer-link
vPC area id : 2
Peer standing : peer adjacency shaped okay
vPC keep-alive standing : peer is alive
Configuration consistency standing : success
Per-vlan consistency standing : success
Sort-2 consistency standing : success
vPC function : main
Variety of vPCs configured : 0
Peer Gateway : Enabled
Twin-active excluded VLANs : -
Swish Consistency Examine : Enabled
Auto-recovery standing : Enabled, timer is off.(timeout = 240s)
Delay-restore standing : Timer is off.(timeout = 30s)
Delay-restore SVI standing : Timer is off.(timeout = 10s)
Operational Layer3 Peer-router : Enabled
Digital-peerlink mode : Disabled
vPC Peer-link standing
---------------------------------------------------------------------
id Port Standing Energetic vlans
-- ---- ------ -------------------------------------------------
1 Po1 up 1
I am additionally going through bother in determining on how the gateways visitors will go and I’ve arrange a VLAN with an IP handle for this.
Right here is the swap config:
interface Ethernet1/46
description vPC Keepalive hyperlink
no switchport
vrf member keepalive
ip handle 192.168.157.217/30
no shutdown
vpc area 2
peer-keepalive vacation spot 192.168.157.218 supply 192.168.157.217 vrf keepalive
peer-gateway
layer3 peer-router
auto-recovery
interface Ethernet1/47
switchport mode trunk
channel-group 1 mode energetic
interface Ethernet1/48
switchport mode trunk
channel-group 1 mode energetic
interface port-channel1
switchport mode trunk
spanning-tree port kind community
vpc peer-link
May anybody please share any insights on how can I resolve this?