Cisco triangle community with static routing not working

By
codesanitize
-
0
19
Cisco triangle community with static routing not working


I’ve this community

enter image description here

when the community tries to speak with the routers it fails.

I’ve already tried every thing in my energy with out success.
methods to assign ip addresses in routing

enter image description here

I’ve been attempting for a very long time to make static routing work however with out success

  • I’m utilizing router 2911
  • I’m utilizing the 2960 change

right here is the cisco file
https://drive.google.com/file/d/1qRY1WU2RvFbIdxuhzYSe_vFXf1uE2sy3/view?usp=sharing

configuration router informatica

Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to up









Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!



Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#interface GigabitEthernet0/0
Router(config-if)#ip handle 172.17.2.1 255.255.255.252
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/2
Router(config-if)#ip handle 172.16.10.1 255.255.255.224
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/2
Router(config-if)#ip handle 172.16.10.1 255.255.255.224
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to up

Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/1
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/1
Router(config-if)#ip handle 172.17.1.1 255.255.255.252
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/1
Router(config-if)#ip handle 172.17.1.1 255.255.255.252
Router(config-if)#








Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!



Press RETURN to get began!



Press RETURN to get began!



Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#
Router(config)#
Router(config)#
Router(config)#








Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!



Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#
Router(config)#








Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!

configuration router RRHH

Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to up









Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!



Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#interface GigabitEthernet0/0
Router(config-if)#ip handle 172.17.2.1 255.255.255.252
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/2
Router(config-if)#ip handle 172.16.10.1 255.255.255.224
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/2
Router(config-if)#ip handle 172.16.10.1 255.255.255.224
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to up

Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/1
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/1
Router(config-if)#ip handle 172.17.1.1 255.255.255.252
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface GigabitEthernet0/1
Router(config-if)#ip handle 172.17.1.1 255.255.255.252
Router(config-if)#








Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!



Press RETURN to get began!



Press RETURN to get began!



Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#
Router(config)#
Router(config)#
Router(config)#








Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!



Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#
Router(config)#








Router con0 is now obtainable






Press RETURN to get began.













Press RETURN to get began!

configuration router produccion

Router con0 is now obtainable






Press RETURN to get began.





















Router con0 is now obtainable






Press RETURN to get began.





















Router con0 is now obtainable






Press RETURN to get began.













Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#ip route 172.16.10.0 255.255.255.224 172.17.1.1
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to down









Router con0 is now obtainable






Press RETURN to get began.












%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, modified state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, modified state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, modified state to up










Router con0 is now obtainable






Press RETURN to get began.













Router>allow
Router#
Router#configure terminal
Enter configuration instructions, one per line.  Finish with CNTL/Z.
Router(config)#
Router(config)#
Router(config)#
Router(config)#interface GigabitEthernet0/0
Router(config-if)#








Router con0 is now obtainable






Press RETURN to get began.





















Router con0 is now obtainable






Press RETURN to get began.

LEAVE A REPLY

Please enter your comment!
Please enter your name here