I am engaged on the design of a community for my new appartment. To make it clear, I am going to record some information and restrictions I am dealing with.
- Room 1 ISP BOX (router) is critical, it gives my symmetric 1Gbps web hyperlink with static IP and in addition serves as a wi-fi entry level. It has some configurability, however I do know for positive it does not help VLANs.
- Room 1 Workstation should stay in room 1.
- There is not any wired hyperlink between rooms 1 and a pair of in the intervening time, however I can sneak a single Cat. 6A cable by way of the ground skirting boards and a few holes drilled by way of the wall. The appartment wasn’t designed with good networking in thoughts and this operation requires operating the cable by way of a balcony, but it surely’s the one possible approach to do it.
- The server rack wants to remain in room 2, there’s merely not sufficient house for it in room 1 and room 1 is meant to be a “dwelling space”, so there is no means I am placing loud stuff there.
- Servers B and C are used for a small sport group I am operating, internet hosting the sport server, some group stuff and so forth, so that they must be accessed from the web, and by extension, for safety causes, must be remoted from house stuff
- Server A is inner server for personal backups, storage, multimedia, and so forth, so it should be remoted from sport servers (C and B)
- Visitors between workstation D (room 1) and server A (room 2) should not intervene with the skin visitors to servers B/C. When workstation D is transferring numerous information at 1Gbps to/from server A, the participant expertise with servers B/C should stay the identical, inner file transfers should not introduce a lag.
So, my concepts thus far are as follows:
- Use low cost used managed 1gigabit change for the rack and workstation in room 2
- Use 2.5gigabit switches to attach each rooms with 2.5gigabit hyperlink (have they got to be managed, so long as they help VLANs?)
- Join rack 2.5gigabit change to rack 1gigabit change utilizing 2 or 3 ports and use hyperlink aggregation
- Arrange separate VLANs on 1gigabit change to isolate private and non-private stuff
I haven’t got numerous expertise with networking besides one college course I took way back, and all I bear in mind are some cisco console instructions, so please, please inform me what’s flawed with this strategy (as I am positive there’s numerous nonsense right here), and if I am lacking one thing or if I can cut back the complexity additional. Thanks prematurely!